Conductive Polymer Hybrid Aluminum Electrolytic Capacitor
【PHLA SERIES】
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
Low ESR, high ripple current capability, 105 , 5000 hours
AEC-Q200 Compliant
RoHS Compliant
【PHLB SERIES】
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
Low ESR, high ripple current capability, 125 , 4000 hours.
AEC-Q200 Compliant
RoHS Compliant
【PHLD SERIES】
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
Low ESR, 125 , 4000 hours
Extra high ripple current, large capacitance
AEC-Q200 Compliant
RoHS Compliant
【PHLE SERIES】
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
Low ESR, high ripple current capability,
Large Capacitance, 105 , 10000 hours.
AEC-Q200 Compliant
RoHS Compliant
【PHLF SERIES】
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
Low ESR, high ripple current capability,
Large Capacitance, 135 , 4000 hours.
AEC-Q200 Compliant
RoHS Compliant
【PHVA SERIES】
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
Low ESR, high ripple current capability, 105 , 5000 hours
AEC-Q200 Compliant
RoHS Compliant
【PHVB SERIES】
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
Low ESR, high ripple current capability, 125 , 4000 hours
AEC-Q200 Compliant
RoHS Compliant
【PHVD SERIES】
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
Low ESR, 125 , 4000 hours
Extra high ripple current, large capacitance
AEC-Q200 Compliant
RoHS Compliant
【PHVE SERIES】
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
Low ESR, high ripple current capability, Large Capacitance 105 , 10000 hours.
AEC-Q200 Compliant
RoHS Compliant
【PHVF SERIES】
Conductive Polymer Hybrid Aluminum Electrolytic Capacitors
Low ESR, high ripple current capability, Large Capacitance 135 , 4000 hours.
AEC-Q200 Compliant
RoHS Compliant
Polarity
Capacitors are polarized.
Never apply a reverse voltage or AC voltage. Connecting with wrong polarity will short-circuit or damage the capacitor with the pressure relief vent opening early on. To identify the polarity of a capacitor, see the relevant diagram in the catalogs or product specifications, or the polarity marking on the body of the capacitors.
Operating voltage
Do not apply an over-voltage that exceeds a rated voltage specified for the capacitors. The total peak value of the ripple voltage plus the DC voltage must not exceed the rated voltage of the capacitors. Capacitors do not require voltage derating within the category temperature. Although capacitors specify a surge voltage that exceeds the full rated voltage, it does not assure long-term use but limited use under specific conditions.
Ripple current
Do not apply an over current that exceeds the rated ripple current specified for the capacitors. Excessive ripple current will increase heat production within the capacitors.
At the time of low DC bias voltage, reverse voltage may be applied if uses with less than rated ripple current. Please use it as far as the reverse voltage is not applied. The rated ripple current is specified along with a specific ripple frequency. Where using the capacitors at any ripple frequency other than the specified frequency, calculate the allowable ripple current by multiplying the rated ripple current by a frequency compensation factor (Frequency Multiplier) specified for each product series.
Charging and discharging
Do not use capacitors in circuits intended for rapid charge and discharge cycle operations. If capacitors are used in the circuits that repeat a charge and
discharge with a large voltage drop or a rapid charge and discharge at short interval cycle, capacitance will decrease and/or the capacitors will be damaged by internal heat generation.
Please consult us the capacitors to use for the circuit where rapid charge and discharge is repeated. Please be careful about rush currents. Recommend to install protective circuit.
Using capacitors for significantly safety-oriented applications
Consult with us in advance of usage of our products in the following listed applications.
①Aerospace equipment
②Power generation equipment such as thermal power,
nuclear power etc.
③Medical equipment
④Transport equipment (automobiles, trains, ships, etc.)
⑤Transportation control equipment
⑥Disaster prevention / crime prevention equipment
⑦Highly publicized information processing equipment
⑧Submarine equipment
⑨Other applications that are not considered general-purpose
applications.
About AEC-Q200
